{"id":1541,"date":"2014-08-22T08:54:25","date_gmt":"2014-08-22T12:54:25","guid":{"rendered":"http:\/\/www.krissmotors.com\/Mk2\/?page_id=1541"},"modified":"2016-11-10T07:46:55","modified_gmt":"2016-11-10T12:46:55","slug":"restoration-menu","status":"publish","type":"page","link":"https:\/\/krissmotors.com\/Mk2\/?page_id=1541","title":{"rendered":"Restoration menu"},"content":{"rendered":"

\"Jaguar<\/a><\/p>\n

Organized in the manner of the Jaguar Service Manual<\/a>.<\/p>\n

MILESTONES<\/strong>
\nGraduation photos — October 24, 2016<\/a>
\nProject completion — September 30, 1016<\/a>
\nExterior front end finished — July 30, 2016<\/a>
\nFirst road test — October 22, 2015<\/a>
\nFirst engine start — October 1, 2015<\/a>
\nOn the road to the blaster — August 25, 2014<\/a>
\nRestoration phase begins — August 21, 2014<\/a>
\nAfter a month of disassembly — July 26, 2014<\/a>
\nFirst disassembly step — June 26, 2014<\/a>
\nProject Gantt chart<\/a>
\n<\/h6>\n
GENERAL INFORMATION<\/strong>
\n12v accessory options<\/a>
\nAutomotive eras<\/a>
\nBritish wire color codes<\/a>
\nCAD in the cloud<\/a>
\nDebugging (punch list)<\/a>
\nDIY electroplating<\/a>
\nDriving the Jaguar Mk2 in 1963<\/a>
\nExploded part plates<\/a>
\nFinding parts: SNG Barratt<\/a>
\nHog rings<\/a>
\nHose and clamp specifications<\/a>
\nIan Callum Jaguar Mk2 redux<\/a>
\nInspector Morse Jaguar (1961 Mk2 2.4)<\/a>
\nJaguar books<\/a>
\nJaguar fasteners<\/a>
\nJaguar factory tour, 1961<\/a>
\nJaguar handbook revisited<\/a>
\nJaguar iconology<\/a>
\nJaguar Mk2 1959 brochure<\/a>
\nJaguar Mk2 3D model<\/a>
\nJaguar Mk2 fleet survival<\/a>
\nJaguar Mk2 restoration in business perspective<\/a>
\nJaguar service bulletins<\/a>
\nJaguar terminology database<\/a>
\nJohn Skinner Mfg UK backstory<\/a>
\nJoseph Lucas (electrical parts) & Smiths gauges<\/a>
\nLucas battery<\/a>
\nLight bulbs (including LEDs)<\/a>
\nMaintenance log<\/a>
\nMedia blasting<\/a>
\nMk2 from a Jaguar perspective<\/a>
\nNumbers: chassis, engine, body, gearbox<\/a>
\nPaint chemistry<\/a>
\nParts list<\/a>
\nPetrol, octane, ethanol, and related issues<\/a>
\nProduction order changes<\/a>
\nRestoration cost<\/a>
\nRestoration philosophy<\/a>
\nRoutine maintenance summary<\/a>
\nSeat belts and safety<\/a>
\nShapeways 3D printing<\/a>
\nSolex backgrounder<\/a>
\nSpecifications — modified Mk2 with 2.4 engine<\/a>
\nSpire (speed) nuts<\/a>
\nTest drive checklist<\/a>
\nTop dead center<\/a>
\nTorque tightening specifications<\/a>
\nWhere our readers come from<\/a><\/h6>\n
ENGINE<\/strong>
\nAir cleaner<\/a>
\nAluminum flywheel fitment<\/a>
\nAluminum polishing: camshaft covers, air cleaner<\/a>
\nBreather cover, inlet manifold aluminum restoration<\/a>
\nBreather pipe and hose<\/a>
\nCrankshaft cover plate: making gaskets<\/a>
\nCrankshaft damper<\/a>
\nCrankshaft damper assembly (Metalastik)<\/a>
\nCrankshaft damper machining<\/a>
\nCrankshaft front seal<\/a>
\nCrankshaft pulley replacement<\/a>
\nCrankshaft rear seal<\/a>
\nCylinder head painting<\/a>
\nDistributor installation (electronic 123\/JAG-6)<\/a>
\nEngine block cradle<\/a>
\nEngine block cradle design<\/a>
\nEngine block refresh and upgrade<\/a>
\nEngine deconstruction: starter, clutch, flywheel<\/a>
\nEngine detailing<\/a>
\nEngine fine tuning<\/a>
\nEngine first start with video<\/a>
\nEngine first start troubleshooting<\/a>
\nEngine fixings<\/a><\/p>\n

\nIncludes heater hose, starter cable, mid-engine stabilizer, rev gen, flexible clutch hose, accelerator linkage, oil pressure gauge connection, brake servo vacuum line, speedometer cable, alternator, exhaust manifolds, air cleaner, coil-to-fuse wiring, intake manifold, fuel filter and fuel line connection, intake water jacket to water pump hose, gearbox tunnel cover, cylinder head oil pipe\n<\/p><\/blockquote>\n

Engine front mount<\/a>
\nEngine front mount pads (upgraded)<\/a>
\nEngine block mounts<\/a>
\nEngine-gearbox mating<\/a>
\nEngine\/gearbox rear mount<\/a>
\nEngine ground strap<\/a>
\nEngine install<\/a>
\nEngine stabilizer (mid-engine mount)<\/a>
\nFan fitment<\/a>
\nFan trimming<\/a>
\nFlywheel and clutch installation<\/a>
\nGearbox selector ring<\/a>
\nInlet manifold removal, thermostat, water temperature sensor<\/a>
\nInlet manifold reassembly<\/a>
\nOil dip stick<\/a>
\nOil filter — leak<\/a>
\nOil filter — leak remedy<\/a>
\nOil filter upgrade<\/a>
\nOil filter reassembly<\/a>
\nOil pan removal<\/a>
\nOil pan restoration (1): POR 15 system<\/a>
\nOil pan restoration (2): sump cover, gasket, pointer<\/a>
\nOil pipe cylinder head to sump<\/a>
\nOil sump hose<\/a>
\nSpark plugs<\/a>
\nStarter motor, clutch, and flywheel<\/a>
\nStarter motor install<\/a>
\nStarter motor test<\/a>
\nWater pump removal<\/a>
\nWater pump reassembly<\/a>
\nWater pump reassembly fitment issue<\/a><\/p>\n

FUEL SYSTEM and CARBURETORS<\/strong>
\nAccelerator<\/a>
\nAir cleaner<\/a>
\nCarburetors and air intake<\/a>
\nFuel filter<\/a>
\nFuel system boot connections<\/a>
\nHard line connections under chassis from petrol tank<\/a>
\nManual choke control and switch<\/a>
\nPetrol tank and fuel level sender<\/a>
\nPetrol tank installation<\/a>
\nSolex backgrounder<\/a>
\nSolex carburetor rebuild<\/a>
\nSTA-BILL fuel stabilizer<\/a><\/h6>\n
COOLING SYSTEM<\/strong>
\nFan balance and radiator install<\/a>
\nRadiator detailing<\/a>
\nRadiator fan adjustments<\/a><\/h6>\n
CLUTCH<\/strong>
\nBleeding hydraulic lines<\/a>
\nClutch and flywheel installation<\/a>
\nClutch cover conflict with bell housing<\/a>
\nClutch slave cylinder hard line<\/a>
\nClutch slave cylinder spring return<\/a>
\nMaster cylinder pedal assembly<\/a>
\nClutch slave cylinder operating rod, connecting pipe<\/a>
\nHard line connection from master cylinder<\/a>
\nPedal pads<\/a><\/h6>\n
GEARBOX, OVERDRIVE and PROPELLER SHAFT<\/strong>
\nGearbox and overdrive assessment<\/a>
\nGearbox and overdrive external restoration<\/a>
\nGearbox removal from engine block<\/a>
\nOverdrive oil drain plug tool<\/a>
\nPropeller shaft installation<\/a><\/h6>\n
REAR AXLE<\/strong>
\nDifferential identification<\/a>
\nRear axle\/differential paint, rear seals<\/a>
\nRear axle installation<\/a>
\nRear axle thread repair<\/a><\/h6>\n
STEERING<\/strong>
\nBakelite crack repair<\/a>
\nBakelite steering wheel<\/a>
\nBurman F3 steering box<\/a>
\nBurman steering box oil leak<\/a>
\nBurman steering box re-mount<\/a>
\nEnd assembly and tie rods<\/a>
\nLower steering column installation<\/a>
\nSteering column fitment<\/a>
\nSteering column indicators<\/a>
\nSteering column pigtails<\/a>
\nSteering column squeak<\/a>
\nSteering column squeak redux<\/a>
\nSteering column switches<\/a>
\nSteering wheel and horn button<\/a><\/h6>\n
FRONT SUSPENSION<\/strong>
\nAlignment (precision measurements)<\/a>
\nAlignment (preliminary)<\/a>
\nAnti-roll bar bushes<\/a>
\nAnti-roll bar comparison<\/a>
\nAnti-roll bar installation<\/a>
\nCoil height and dampers<\/a>
\nCrossmember<\/a>
\nFront springs<\/a>
\nFront suspension comparison: original versus restoration<\/a>
\nFront suspension installation<\/a>
\nFront suspension restoration, part 1<\/a>
\nFront suspension restoration, part 2<\/a>
\nFront suspension restoration, part 3<\/a>
\nLower wishbone<\/a>
\nSlotted nuts fitment problem<\/a>
\nTire rubbing<\/a>
\nUpper wishbone<\/a><\/h6>\n
REAR SUSPENSION<\/strong>
\nAlignment (preliminary)<\/a>
\nControl arm bushing removal<\/a>
\nControl arm new bushings, paint<\/a>
\nLeaf springs, poly bushes<\/a>
\nPanhard rod with new bushings<\/a>
\nRear suspension installation<\/a><\/h6>\n
BRAKES<\/strong>
\nBleeding hydraulic lines<\/a>
\nBrake caliper – front<\/a>
\nBrake caliper – rear<\/a>
\nBrake fluid reservoir leaking<\/a>
\nBrake lines – rear axle<\/a>
\nBrake servo and reservac<\/a>
\nFront brake rotors and hubs<\/a>
\nHandbrake cable and end fitting<\/a>
\nHandbrake cable support<\/a>
\nHandbrake compensator assembly<\/a>
\nHandbrake lever<\/a>
\nHard line connections from master cylinder and brake booster<\/a>
\nMaster cylinder pedal assembly, part 1<\/a>
\nMaster cylinder pedal assembly, part 2<\/a>
\nPedal pads<\/a>
\nRear brake rotors and hubs<\/a><\/h6>\n
WHEELS and TIRES<\/strong>
\nTires<\/a>
\nWire wheels<\/a>
\n<\/h6>\n
BODY<\/strong>
\nBody shell assessment – post-blasting, damaged wing edge cutout<\/a>
\nBody shell blasting<\/a>
\nBody shell reference photos – end of disassembly phase<\/a>
\nBody work, part 1<\/a>
\nBody work, part 2<\/a>
\nBody work, part 3<\/a>
\nBody work, part 4<\/a>
\nBody work, part 5<\/a>
\nBonnet cable (connects to catch)<\/a>
\nBonnet catch<\/a>
\nBonnet hinges<\/a>
\nBonnet latch\/catch, boot lock<\/a>
\nBoot seal<\/a>
\nBumper and spat assembly<\/a>
\nBumper mount modification for rear installation<\/a>
\nDoor check arms<\/a>
\nDoor, hood, bonnet mounting<\/a>
\nDoor insulation<\/a>
\nDoor lock mechanism fix<\/a>
\nDoor moisture barrier<\/a>
\nDoor seals<\/a>
\nDoor window fitment, front<\/a>
\nDoor window frame and glass installation<\/a>
\nFront grille and bumper<\/a>
\nFront grille mount<\/a>
\nGlass (windscreen and backlight) installation<\/a>
\nGlass (windscreen and backlight) preparation<\/a>
\nHinges<\/a>
\nIdentification tags<\/a>
\nPaint: exterior<\/a>
\nPaint: interior<\/a>
\nPainter for finish coat<\/a>
\nPaint milestone completion<\/a>
\nPreparation for finish clearcoat paint<\/a>
\nPrimer coat<\/a>
\nRear bumper<\/a>
\nRear bumper mount modification<\/a>
\nRear door ventilator seal<\/a>
\nRoof vibration dampening<\/a>
\nRocker panel end plug<\/a>
\nShut face panel door fillers<\/a>
\nUndercarriage painting with POR 15<\/a>
\nUrethane single stage and clearcoat paint<\/a>
\nWindow channel felt (door frame)<\/a>
\nWindow sweeps<\/a>
\n<\/h6>\n
CARPET, INSULATION and TACK STRIP<\/strong>
\nCarpet installation<\/a>
\nDipper switch finish treatment<\/a>
\nInsulation (vibration, heat, sound)<\/a>
\nRear seat insulation<\/a>
\nRocker panel finish<\/a>
\nRoof vibration dampening<\/a>
\nTack strip installation<\/a>
\n<\/h6>\n
UPHOLSTERY<\/strong>
\nBacklight shelf<\/a>
\nBacklight shelf piping<\/a>
\nB\/C post interior trim<\/a>
\nBoot details<\/a><\/p>\n

Center console with shifter and ashtray<\/strong>
\n  – Ashtray on center console<\/a>
\n  – Ashtray fitment<\/a>
\n  – Ashtray restoration<\/a>
\n  – Assembly of console components<\/a>
\n  – Panel top trim of center console<\/a>
\n  – Side trim panels<\/a><\/p>\n

Cubby box fitment<\/a>
\nDash panel covering (Rexine replacement)<\/a><\/p>\n

Door panels and facia<\/strong>
\n  – Door facia detail<\/a>
\n  – Door handle position and locking<\/a>
\n  – Door panel armrests and pockets<\/a>
\n  – Front door panel<\/a>
\n  – Front door facia preparation<\/a>
\n  – Rear door panel and facia<\/a>
\n  – Rear door lock mechanism fix<\/a><\/p>\n

Front seat (bucket style)<\/strong>
\n  – Assembly of seat components (complete restoration)<\/a>
\n  – Back guard of front seat<\/a>
\n  – Bottom cushion test fitting<\/a>
\n  – Bottom cushion, 2nd attempt<\/a>
\n  – Bottom cushion, 3rd attempt<\/a>
\n  – Burlap on bottom spring cushion<\/a>
\n  – Burlap on back cushion spring<\/a>
\n  – Cushion autopsy<\/a>
\n  – Diamond plate foot rest (front seat)<\/a>
\n  – Deconstruction detail of front seat<\/a>
\n  – Fold-down tray<\/a>
\n  – Fold-down tray backing panel<\/a>
\n  – Fold-down tray wood veneer inserts<\/a>
\n  – Fold-down tray restoration<\/a>
\n  – Frame assembly detail<\/a><\/p>\n

Furflex (draught excluder) edging<\/a>
\nHeadliner cants<\/a>
\nHeadliner, part 1<\/a>
\nHeadliner, part 2<\/a>
\nHeadliner, part 3<\/a>
\nHog rings<\/a>
\nInterior color scheme<\/a>
\nInterior kit planning<\/a>
\nInterior kit vendor comparison<\/a>
\nInterior kit vendor selection<\/a>
\nKick panel installation<\/a>
\nKick panel templates<\/a>
\nLeather hides<\/a>
\nLuggage compartment casings<\/a>
\nRear door ashtray<\/a><\/p>\n

Rear seat (bench style)<\/strong>
\n  – Armrest (pull-down) autopsy<\/a>
\n  – Armrest fabrication, part 1<\/a>
\n  – Armrest fabrication, part 2<\/a>
\n  – Deconstruction of rear seat<\/a>
\n  – Lower bulkhead treatment<\/a>
\n  – Seat bottom upholstery<\/a>
\n  – Seat frames<\/a>
\n  – Seat insulation<\/a>
\n  – Seat installation<\/a>
\n  – Squab upholstery<\/a><\/p>\n

Seat cover fabrication<\/a>
\nSide trim panel piping<\/a>
\nSun visors<\/a>
\nTop casings (under-dash panels)<\/a>
\nUpholstery clips<\/a>
\nUpholstery kit shipment #1<\/a>
\nUpholstery kit shipment #2<\/a>
\nUpholstery kit shipment #3<\/a>
\nUpholstery manufacturing<\/a>
\n<\/h6>\n

WOOD, CHROME and MISC INTERIOR\/EXTERIOR<\/strong>
\nA-post triangle filler<\/a>
\nB\/C post interior trim<\/a>
\nBonnet center chrome bead<\/a>
\nBonnet trim and catch<\/a>
\nBoot details<\/a>
\nCenter dash panel label strip<\/a>
\nCenter dash label strip fabrication<\/a>
\nCenter dash label strip installation<\/a>
\nChrome moulding installation<\/a>
\nChrome trim assessment<\/a>
\nCubby box fitment<\/a>
\nCubby facia assembly<\/a>
\nDash milestone<\/a>
\nDipper switch finish treatment<\/a>
\nD-post filler panels<\/a>
\nDoor facia detail<\/a>
\nDoor facia preparation<\/a>
\nDoor facia wood supports<\/a>
\nExterior door handles<\/a>
\nFacia bracing block repair<\/a>
\nFlush finish washers (wood door caps and windscreen)<\/a>
\nGearbox cover modification (fiberglass)<\/a>
\nGearbox selector ring and grommet<\/a>
\nGrille mount<\/a>
\nHeadrests?<\/a>
\nInstrument facia board deconstruction<\/a>
\nJaguar hood mascot<\/a>
\nLucas wing mirrors<\/a>
\nMirror finish for wood<\/a>
\nMurkett name badge<\/a>
\nNewspaper tray flocking<\/a>
\nNewspaper tray installation<\/a>
\nRear bumper finish seal<\/a>
\nRear door ventilator seal<\/a>
\nSeat runners<\/a>
\nSun visors<\/a>
\nTest drive readiness — front seats and console<\/a>
\nTread plate treatment<\/a>
\nVeneer painting<\/a>
\nWood repair<\/a>
\nWood stripping and refinishing<\/a>
\nWood treatment diary<\/a><\/h6>\n
EXHAUST SYSTEM<\/strong>
\nExhaust manifolds: ceramic coating<\/a>
\nExhaust system installation<\/a>
\nExhaust system planning<\/a><\/h6>\n
HEATING, VENTILATION<\/strong><\/p>\n

Heater CAD files (for 3D printing and fabrication, courtesy of Bruce Murray)
\nVane #1 – Solidworks file<\/a>
\nVane #2 – Solidworks file<\/a>
\nVane #3 – Solidworks file<\/a>
\nHeater motor plate – PDF mechanical drawing<\/a><\/p><\/blockquote>\n

Air distributor box<\/a>
\nAir distributor box redux<\/a>
\nDemister<\/a>
\nHeater engine hose connections<\/a>
\nHeater lever label modification<\/a>
\nHeater upgrade, part 1<\/a>
\nHeater upgrade, part 2<\/a>
\nHeater upgrade, part 3<\/a>
\nHeater upgrade, part 4<\/a>
\nHeater upgrade, part 5<\/a>
\nHeater upgrade, part 6<\/a>
\nHeater upgrade, part 7<\/a>
\nNo draught ventilator deconstruction (window)<\/a>
\nNo draught ventilator restoration, front<\/a>
\nNo draught ventilator restoration, rear<\/a>
\nScuttle ventilator installation<\/a>
\nVentilator glass seal<\/a>
\nWater valve, Shapeways 3D printing of valve mount<\/a>
\nWindow channel felt<\/a>
\nWood trim screw fitment<\/a><\/h6>\n

WINDSCREEN WIPER, WASHING<\/strong>
\nWiper motor and switch (Lucas)<\/a>
\nWiper system, part 1<\/a>
\nWiper system, part 2<\/a><\/h6>\n
ELECTRICAL<\/strong><\/p>\n

Complete Wiring Diagrams (PDF format, updated 05\/02\/16)
\nMaster schematics<\/a>
\nHarness layout<\/a>
\nCenter gauge panel<\/a>
\nBarrier block details<\/a>
\nCircuits, pigtails, and other details<\/a><\/p><\/blockquote>\n

Alternator<\/a>
\nAlternator main feed routing<\/a>
\nAlternator wiring<\/a>
\nBattery disconnect switch<\/a>
\nBattery ground strap<\/a>
\nBattery – Lucas antique replica<\/a>
\nBattery – Lucas antique replica installation<\/a>
\nBattery – Lucas antique replica maintenance<\/a>
\nBrake light switch (electromechanical)<\/a>
\nCenter dash panel planning<\/a>
\nCenter dash panel wiring, part 1<\/a>
\nCenter panel wiring, part 2<\/a>
\nChecking continuity<\/a>
\nClassic Technologies (CT) fuse panel installation<\/a>
\nCubby light and switch<\/a>
\nDipper switch<\/a>
\nDistributor replacement options<\/a>
\nDistributor TDC orientation<\/a>
\nElectroluminescent dash and gauge lighting<\/a>
\nElectronic distributor installation (123\/JAG-6)<\/a>
\nEngine bay wiring<\/a>
\nFlasher switch fault diagnosis<\/a>
\nFog light wiring<\/a>
\nFront harness installation<\/a>
\nFront lights & horn harness<\/a>
\nFront marker lights<\/a>
\nFuse box cover knobs<\/a>
\nFuse panel planning<\/a>
\nFuse panel wiring (Classic Technologies unit)<\/a>
\nHalogen headlights<\/a>
\nHarness design<\/a>
\nHarness sleeving<\/a>
\nHorn switch closeup<\/a>
\nLight bulbs<\/a>
\nLucas reverse\/overdrive switch autopsy<\/a>
\nMap light modification<\/a>
\nMulti-pin connectors<\/a>
\nPanel light switch re-purposing<\/a>
\nPhysical wiring, barrier terminal blocks<\/a>
\nPhysical wiring, rocker panels and boot<\/a>
\nRear quarters interior lamp<\/a>
\nSmiths voltmeter<\/a>
\nSolenoid and shelf mount<\/a>
\nSpark plug wire loom<\/a>
\nSteering column indicators<\/a>
\nSteering column pigtails<\/a>
\nSteering column switches<\/a>
\nTrunk lid lights and tilt switch<\/a>
\nTrunk lid light modification for LED bulbs<\/a>
\nUSB port<\/a>
\nVehicle wiring schematic<\/a>
\nWiper motor and switch (Lucas)<\/a>
\nWire holds on the B\/C post<\/a>
\nWire labels<\/a>
\n<\/h6>\n

ACCESSORIES<\/strong>
\nAlpine DIN unit installation<\/a>
\nAlpine DIN unit microphone holder<\/a>
\nAlpine DIN unit stereo speaker mount<\/a>
\nAlpine iXL-700 manual (PDF format)<\/a>
\nCad plating (batch #1)<\/a>
\nDouble DIN head units (radio replacement)<\/a>
\nHeadrests?<\/a>
\nLock nuts (nylock)<\/a>
\nLucas Screenjet washer<\/a>
\nSeat belt anchors<\/a>
\nSeat belts and safety<\/a>
\nSeat belt installation<\/a>
\nSeat belt re-webbing<\/a>
\nSeat belt webbing colors<\/a>
\nRadio antenna<\/a>
\nRadio panel modification, part 1<\/a>
\nRadio panel modification, part 2<\/a>
\nRadio panel modification, part 3<\/a>
\nRadio panel test fitting<\/a>
\nRadio upgraded to multimedia unit<\/a>
\nShapeways 3D printing, heater valve mount<\/a>
\nUSB port on newspaper tray<\/a>
\nWheel jack mount in boot<\/a>
\nWheel hub spinner tool<\/a>
\nWheel hub spinner tool enhancement<\/a>
\nWheel hub spinner tool sleeves<\/a>
\n<\/h6>\n
INSTRUMENTS<\/strong>
\nElectroluminescent gauge lighting test<\/a>
\nHorns<\/a>
\nGauge modification and cleaning<\/a>
\nJoseph Lucas (electrical parts) & Smiths gauges<\/a>
\nOil pressure sensor (electroplating)<\/a>
\nSmiths small gauges<\/a>
\nSmiths voltmeter<\/a><\/h6>\n

Posts indexed through October 31, 2016<\/em><\/p>\n","protected":false},"excerpt":{"rendered":"

Organized in the manner of the Jaguar Service Manual. MILESTONES Graduation photos — October 24, 2016 Project completion — September 30, 1016 Exterior front end finished — July 30, 2016 First road test — October 22, 2015 First engine start — October 1, 2015 On the road to the blaster...<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"open","ping_status":"open","template":"","meta":{"pmpro_default_level":"","footnotes":""},"class_list":["post-1541","page","type-page","status-publish","hentry","pmpro-has-access"],"_links":{"self":[{"href":"https:\/\/krissmotors.com\/Mk2\/index.php?rest_route=\/wp\/v2\/pages\/1541","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/krissmotors.com\/Mk2\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/krissmotors.com\/Mk2\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/krissmotors.com\/Mk2\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/krissmotors.com\/Mk2\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1541"}],"version-history":[{"count":164,"href":"https:\/\/krissmotors.com\/Mk2\/index.php?rest_route=\/wp\/v2\/pages\/1541\/revisions"}],"predecessor-version":[{"id":1544,"href":"https:\/\/krissmotors.com\/Mk2\/index.php?rest_route=\/wp\/v2\/pages\/1541\/revisions\/1544"}],"wp:attachment":[{"href":"https:\/\/krissmotors.com\/Mk2\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1541"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}