While most of the parts that need plating will be handled professionally by Plating for Electronics, we’re experimenting with DIY tin-zinc electroplating for parts that probably wouldn’t survive the commercial chemical process, or need special handling. A good candidate is the oil pressure sensor mounted at the top of the…
TOOLS
MAJOR TOPICS
-
Kriss Motors says:Avoiding any constraint on the cable should be the primary objective.
-
Eric Tyler says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says:
-
AllanWood says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says:
-
Kriss Motors says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says:
-
Peter Boston says:
-
Eric Tyler says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says:
-
Peter Boston says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says:
-
Sam H says: