See also part 1. A 1/8″ steel rod was glued to the radio panel edge using JB Weld (a very useful two-part epoxy) to emulate the leather piping, followed by the machined top plate. The lever labels will be placed on the outside of the lever nearly touching the metal…
TOOLS
MAJOR TOPICS
-
Actis says:The wiring for the b column went up the column or...
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says:
-
AllanWood says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says:
-
Kriss Motors says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says:
-
Peter Boston says:
-
Eric Tyler says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says:
-
Peter Boston says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says: