After installing the heater casing, the next step was wiring up the motor and electronic control module. The electronic control box, potentially sensitive to heat, was tucked away under the passenger dash. A Molex connector joined the harness to the fan motor, which passes through the dip switch firewall hole,…
TOOLS
MAJOR TOPICS
-
Kriss Motors says:See https://krissmotors.com/Mk2/?p=7111 We used rivets to fasten the new strips instead...
-
erik juelsen says:
-
Kriss Motors says:
-
tommyrae1234@gmail.com says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says:
-
AllanWood says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says:
-
Kriss Motors says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says:
-
Peter Boston says:
-
Eric Tyler says:
-
Kriss Motors says:
-
Eric Tyler says:
-
Kriss Motors says: